POWERFUL |
Pumping capacity (in gallons per hour at a 10-ft. height) |
2200 GPH |
1850 GPH |
1000 GPH |
Approximate hours of pumping with Basement Watchdog: |
Big Standby Battery |
50 hours* |
60 hours* |
100 hours* |
Emergency Standby Battery |
Not recommended |
Not recommended |
50 hours* |
Maintenance Free/AGM Standby Battery** |
40 hours* |
48 hours* |
80 hours* |
Runs intermittently for days on a single charge |
|
|
|
Charger strength (the higher the amps, the faster it will recharge the battery) |
20 amps |
1.6 amps |
0.4 amps |
AUTOMATIC |
Switches automatically to battery power when AC power fails |
|
|
|
Pumps automatically when water volume exceeds the capacity of the main AC pump |
|
|
|
Recharges automatically when power is restored |
|
|
|
Monitors battery and power conditions constantly |
|
|
|
Charges the battery, then the charger shuts off to extend the life of the battery |
|
|
|
Runs the pump weekly to ensure it is working properly |
|
|
|
VERSATILE |
Accommodates maintenance or maintenance free (AGM) batteries |
|
|
|
Connect two batteries to further extend the run time of the system |
|
|
|
Pumps on AC power as well as battery power |
|
|
|
Capable of pumping and charging the battery simultaneously |
|
|
|
MONITORING |
Detects irregularities, sounds an alarm, and pinpoints problems and solutions on the control panel |
|
|
|
Displays the battery charge level |
|
|
|
REMOTE NOTIFICATION |
USB data port to connect to the Basement WiFi or Home Automation Module |
|
|
|
Remote terminal for connection to a security system, auto dialer or other device |
|
|
|
AUDIBLE AND VISUAL ALARMS |
Battery needs water |
|
|
|
Battery is old and needs to be replaced |
|
|
|
Battery is discharged or defective |
|
|
|
Battery cable is loose or terminals are corroded |
|
|
|
Power, fuse or circuit breaker has failed |
|
|
|
Pump has been activated, check the main pump for failure |
|
|
|
Pump is clogged or broken and needs to be cleaned or replaced |
|
|
|
The alarm can be silenced during a power outage |
|
|
|